Back to library

Waste Management

Waste Management is devoted to the presentation and discussion of information on solid waste generation, characterization, minimization, collection, separation, treatment and disposal, as well as manuscripts that address waste management policy, education, and economic and environmental assessments. The journal addresses various types of solid wastes including municipal (e.g., residential, institutional, commercial), agricultural and special (e.g. construction and demolition, household hazardous, sewage sludge, and non-hazardous industrial) wastes.

We welcome both fundamental and applied research that can be related to problems of interest to solid waste researchers, practitioners and/or policy makers. Well documented case studies will be considered but they must describe results that can be applied beyond the specific location of the case study. Manuscripts that focus on the use of a waste material in a new product are often more suitable for a journal that focuses on the material properties of the product. In considering whether a manuscript is suitable for publication in Waste Management, consider whether the information is of potential use to solid waste researchers, practitioners and/or policymakers.
The following are some of the major areas in which papers are solicited:
• Generation and characterization
• Minimization
• Recycling and reuse
• Storage, collection, transport, and transfer
• Treatment (mechanical, biological, chemical, thermal, other)
• Landfill disposal
• Environmental assessments
• Economic analysis
• Policy and regulations
• Education and training
• Planning

Records in our library from this publisher

The contribution of tourism to municipal solid waste generation: A mixed demand-supply approach on the island of Tenerife

2020
Journal Article

Tourism contributes substantially to municipal solid waste generation, yet the waste from tourism systematically remains hidden behind residential waste flows. As a result, municipal fees are set without precise information about waste producers’ contributions, causing budget imbalances and cross-subsidies between residential and economic activities. To estimate tourism’s contribution to mixed waste generation in an island destination, socio-demographic, economic and disposal-related factors are modelled using municipal panel data from 2004 to 2015 for Tenerife (Spain). In contrast to previous studies, a mixed demand-supply approach is adopted to estimate the contribution of main tourism activities to mixed waste generation, thus, differentiating between tourists and residents’ contributions. An auxiliary model is used to isolate employment levels in tourism activities attributable to residents’ consumption and to capture tourists’ and residents’ mobility on the island. Estimates show that main tourism activities generate 0.40 kg of mixed waste per tourist daily, while residential and economic sectors account for 1.19 kg per resident daily. This tourism contribution is significantly lower compared to other studies, as it captures tourism’s contribution to mixed waste generation, attributable only to tourists, following a mixed demand-supply approach. These results shift impacts from tourists to main tourism activities, which highlights the choices made by producers rather than the final customers and reinforces the producers extended responsibility principle. The implementation of a Pay-As-You-Throw tariff for mixed waste is discussed as a way of promoting waste prevention and recycling, as well as avoiding cross-subsidies among waste producers and, as a result, imbalances in municipal budgets.

Current status of solid waste management in small island developing states: A review

2015
Journal Article

This article reviews the current status of waste management in Small Island Developing States (SIDS) and the challenges that are faced in solid waste management. The waste generation rates of SIDS were compared within the three geographic regions namely Caribbean SIDS, Pacific SIDS and Atlantic, Indian Ocean, Mediterranean and South China (AIMS) SIDS and with countries of the Organisation for Economic Co-Operation and Development (OECD). Only Pacific SIDS had a waste generation rate less than 1kg/capita/day. The waste generation rates for the three SIDS regions averaged 1.29kg/capita/day while that for OECD countries was at a mean value of 1.35kg/capita/day. The waste compositions in the different SIDS regions were almost similar owing to comparable consumption patterns while these differed to a large extent with wastes generated in OECD countries. In SIDS, the major fraction of MSW comprised of organics (44%) followed by recyclables namely paper, plastics, glass and metals (total: 43%). In contrast, MSW in OECD countries consisted mainly of recyclables (43%) followed by organics (37%). This article also reviewed the other functional elements of the waste management systems in SIDS. Several shortcomings were noted in the process of waste collection, transfer and transport namely the fact of having outdated collection vehicles and narrow roads which are inaccessible. Among the waste management practices in SIDS, waste disposal via landfilling, illegal dumping and backyard burning were favoured most of the time at the expense of sustainable waste treatment technologies such as composting, anaerobic digestion and recycling.

Where will large amounts of materials accumulated within the economy go? – A material flow analysis of construction minerals for Japan

2007
Journal Article

For all countries analyzed so far, Material Flow Analysis/Accounting (MFA) studies indicate that the overall stock of materials within the economy is growing. Most are construction minerals such as asphalt, cement, sand and gravel, crushed stone, and other aggregates. In the analyses described in this paper, flows and stocks of construction minerals were estimated for Japan from the past to the future to elucidate: (1) the mechanisms by which construction minerals become waste, and (2) the future supply of and demand for recycled crushed stone. The following conclusions were drawn: (1) The amounts of waste construction minerals generated have been and will be at much lower levels than the domestic demand for construction minerals. These differences might indicate consistent growth of the stock of construction minerals, which will become waste in the future. However, certain amounts of materials that we account for as stock can be interpreted already in the environment as dead stock or dissipated waste; such materials can be called “missing stock” or “dissipated stock”. Capturing that missing or dissipated stock is very important because it provides information that clarifies the environmental impacts and loss of resources that these materials cause; it allows estimation of appropriate future waste generation. (2) The amount of construction minerals that are recognized as waste was estimated to increase in the future. An imbalance in the supply of and demand for recycled crushed stone will likely occur in the near future if an expected decline in future road construction is considered.

Municipal solid waste composition determination supporting the integrated solid waste management system in the island of Crete

2006
Journal Article

A one-year survey was conducted in the greater region of Crete (located at the lower region of the Aegean Sea) for the purpose of identifying waste composition (including chemical and physical characterization), as well as any seasonal variation. The investigation was carried out repeatedly at seven landfills and one transfer station in Crete, in four phases. Each sampling phase corresponded to a season (autumn, winter, spring, summer). ASTM D5231-92(2003) standard method and RCRA Waste Sampling Draft Technical Guidance were used. Hand sorting was used for classifying the collected wastes into the following categories: plastics, paper, metals, aluminium, leather-wood-textiles-rubbers, organic wastes, non-combustibles and miscellaneous. Further analysis included proximate and ultimate analysis of combustible materials. Metals such as lead, cadmium and mercury were also investigated. The results show that there has been a significant decrease of organic wastes during the last decade due to the increase of packaging materials, as a result of a change in consumption patterns. Three main waste categories were determined: organic wastes, paper and plastics, which combined represent 76% of the total waste in Crete. Furthermore, a high fraction of glass and a seasonal variation of aluminium indicate a strong correlation of waste composition with certain human activities, such as tourism. There is also a variation between the municipal solid waste (MSW) composition in the region of Crete (2003-2004) and MSW composition suggested in the National Solid Waste Planning (2000) [National Solid Waste Planning, 2000. Completion and particularization of Common Ministerial Act 113944//1944/1997: National Solid Waste Planning, June 2000]. The results of this survey are to be utilized by the regional solid waste authorities in order to establish an integrated waste treatment site, capable of fulfilling the regional waste management demands. © 2005 Elsevier Ltd. All rights reserved.

Waste Management